Wednesday, January 9, 2013

Tutorial: Make a Belt from Boots!


I am so excited about this new tutorial! It's been in the works for a while. It's a belt from boots!


I have had these boots for about three years and they finally broke on me. 3 years is not bad for $10 boots, right? I should be sad but it actually made me happy because there were so many possibilities. These boots had cute buckles so I had options; should I make a cuff? A belt? A hat? I chose to make a belt out of it.



To start, position your scissor ½ inch away from zipper and cut around it.

Then cut around the ankle of the boot. What you want to do is free the whole top part of the boot from the bottom.


Do this for the other boot so you can have two similar pieces like these. 



I straightened the edges of the pieces I am going to sew together to make it easier to sew in a straight line.

I measured to make sure I cut the same amount on each side. With this detail, I had to make sure it looked symmetrical.


Now they look about the same size on each side.


There was a lot of padding in this boot so I cut the edge off so it would be easier to sew.


Here it is with the two pieces sewn together (sorry, forgot to include a pic of me doing that).


I also decided to top stitch the middle seam so it looks a little cleaner.




All this time I was seing the belt detail this way
Then I turned it around and it made sense! This is the natural shape of the waist!


I then thought it was too thick and would look even better without the extra bulk on top. I also thought the buckle detail would show off better.

This is what you have left.

I also cut away more of the padding in the back for easy sewing. 

Now for the elastic! I found an elastic from a dress that I didn’t wear anymore and I cut it off the dress. However, since the belt was thick, I had to use another elastic. You can  buy this kind of thick elastic at most fabric stores. 


If you recycled an elastic from a dress, like me, cut the elastic so you have one strip. Don't worry about measuring now

Place both strips of elastic on top of one side of of belt (belt, right side facing out).


Sew slowly, making sure elastic doesn’t slide while you sew. This was too thick to pin so I just held it tight. 




Turn it around and topstitch. 


I then put it on my waist and measured to see how much elastic I had to cut off to fit me nicely.



 I cut and then sewed on the other side and top stitched.




The end result, front and back.




I have to admit, I took the lazy yet difficult way out. I wanted to finish it so bad that I didn’t want to take the time to put in snaps, that is definitely another option.  The difficult part is then putting it on over your head. Oh well, at least you have the elastic to help you. 

I love the way it came out though!






I would love to hear your thoughts! Also, if you have any questions. Let me know.  















8 comments:

  1. Very innovative and resourceful, love it!

    ReplyDelete
  2. Cool tutorial! Thank you very much for sharing!

    ReplyDelete
  3. Very clever, particularly if you have a small waist. Very flattering.

    ReplyDelete
  4. This is such a good idea if you have old boots :))

    ReplyDelete
  5. I will be keeping my eyes open at thrift stores! Thanks for such a well written tutorial. Absolutely lovely!

    ReplyDelete
  6. WOW! What a crazy awesome idea!!

    ReplyDelete
  7. Thank you so much for these lovely comments! I so appreciate them!!!

    ReplyDelete